Nah, meters are very straightforward and easy to work with. How far is a kilofoot? God only knows, but a kilometre is a trivially visualized distance. What’s 1/100 of a foot? Dunno, but with meters it’s a centimeter which is, again intuitively easy to grasp.
Read the xkcd comic. There are plenty of metric associations you can make in your mind, too.
Metric was designed by a bunch of rich French people
Metric came out of the French Revolution, which was caused by the underclasses rising up and overthrowing “a bunch of rich French people”. And then saying, “Hey, let’s try doing things rationally for a change. Like our systems of measurement.”
Notice that despite the presence of many people who grew up with and use the metric system none are complaining about how hard it was to intuit metric units?
If you stop telling people what they should find intuitive for a moment and actually listen to people telling you about their experiences then you might find that this is not an issue.
I’m not sure if you should be arguing against the metric system because it was applied top-down across Europe by Napoleon, considering the history behind how the imperial system was spread to what is now the USA. I mean, it’s literally called the imperial system.
You missed the point of their comment. Those measurements make sense to you because you grew up with them. If you read the xkcd you can easily see how you can make up the same comparisons for metric
no, I didn’t. You still aren’t understanding even what you are saying, much less other people.
standard measurements are based on practical things that people interact with every day
no. no they are not. Let’s look at some ‘standard’ measurements as you call them (they’re actually not standard as you’ll immediately see):
The foot was a common unit of measurement throughout Europe. It often differed in length not only from country to country but from city to city. Because the length of a foot changed between person to person, measurements were not even consistent between two people, often requiring an average. Henry I of England was attributed to passing the law that the foot was to be as long as a person’s own foot.
Oh, well you might say “an inch is just a foot divided by 12”. nope. no it was not (all stuff in this comment is past measurements, because every unit of measurement on the planet uses metric as its base)
The inch was originally defined as 3 barleycorns.
Perfect. What’s a barleycorn’s length?
As modern studies show, the actual length of a kernel of barley varies from as short as 0.16–0.28 in (4–7 mm) to as long as 0.47–0.59 in (12–15 mm) depending on the cultivar
Oh ok, so it could be up to 3x the distance from one barleycorn to another. Perfect. Another ‘standard’
In medieval times English ploughmen used a wooden stick with a pointed tip to spur or guide their oxen. The rod was the length of this stick.
Great. So this one I have no visual reference at all. Is this pike length or sword length? (oh you’re all about referencing ‘standard’ objects, but just in case you don’t know a pike can be up to 25 feet long)
Do you see how ridiculous this is? You’re talking about standards that evolved over time from some ‘base’ to mean absolutely nothing today in relation to what they were hundreds of years ago. Metric was also based on ‘standard’ things, like the kilogram, which is just the weight of a litre of water (see, simple). You’re acting like the ‘standards’ of one unit are superior to the ‘standards’ of another unit, except that the unit of measurement you’re saying is superior is completely disconnected from each other. If it wasn’t for standards bodies coming in and saying “a foot is not the length of your foot, it’s exactly this … long” then there would be absolutely no way to convert between any units in imperial measurement.
what I said was that the references for standard measures were more useful. We don’t carry around rods for poking oxen much anymore, so that unit of measure is rightly confined to history.
I just showed you exactly how that is not the case. A measurement saying a foot is as long as your own foot is completely useless in every context except the one where you do the measuring and never communicate it to anyone else. The same applies to literally every imperial unit. I also went on to show you that metric units were also based on standard measurements, like kilogram being exactly the weight of a litre of water. You conveniently ignored the fact that imperial was using weird standards while metric used useful, convertible standards. Please try converting 1cu ft of water to weight in imperial, with the ‘standard’ that it’s the length of your foot, not someone else’s foot.
And please do stop referring to imperial units as ‘standard’ measures. That doesn’t mean what you think it does.
That’s for feet only, how about the other measurements? Each person feet also different with each other, it’s kinda weird to just assume children length of their feet is the same with adult’s.
IIRC 1 metre originally is a length choosen so that Earth circumference is 40000km, the later definition is more stable standardization, because turn out you can’t get precise lengths doing that.
Maybe so for feet, how about other measurements and its conversion. Where’s inch coming from and why it’s 12 inch to be 1 feet, and for yards, miles etc. It’s kinda arbitrary, not natural, and confusing
For a person’s foot to measure exactly 12 inches long, they would wear a US size 14 men’s shoe. Size 47 for the Europeans. So “spproximately the size of a foot” is pretty far off anyway. Most people don’t wear size 14 shoes. In fact, people who wear size 14 shoes often have a lot of trouble buying shoes.
deleted by creator
Nah, meters are very straightforward and easy to work with. How far is a kilofoot? God only knows, but a kilometre is a trivially visualized distance. What’s 1/100 of a foot? Dunno, but with meters it’s a centimeter which is, again intuitively easy to grasp.
deleted by creator
What do you use a mile for? One km is about a 15 minute walk.
Metric isn’t intuitive to you because you aren’t used to using it. Relevant xkcd.
Sure, feet might be intuitive, but that’s the exception. What’s an inch? Or a mile? Or a cup? Cups come in more sizes than feet do!
deleted by creator
Read the xkcd comic. There are plenty of metric associations you can make in your mind, too.
Metric came out of the French Revolution, which was caused by the underclasses rising up and overthrowing “a bunch of rich French people”. And then saying, “Hey, let’s try doing things rationally for a change. Like our systems of measurement.”
deleted by creator
Notice that despite the presence of many people who grew up with and use the metric system none are complaining about how hard it was to intuit metric units?
If you stop telling people what they should find intuitive for a moment and actually listen to people telling you about their experiences then you might find that this is not an issue.
deleted by creator
I’m not sure if you should be arguing against the metric system because it was applied top-down across Europe by Napoleon, considering the history behind how the imperial system was spread to what is now the USA. I mean, it’s literally called the imperial system.
deleted by creator
You missed the point of their comment. Those measurements make sense to you because you grew up with them. If you read the xkcd you can easily see how you can make up the same comparisons for metric
deleted by creator
no, I didn’t. You still aren’t understanding even what you are saying, much less other people.
no. no they are not. Let’s look at some ‘standard’ measurements as you call them (they’re actually not standard as you’ll immediately see):
Great. so we’re off to a perfect start. A foot is… as long as your own foot. https://simple.wikipedia.org/wiki/Foot_(unit)
Next up! Inch!
Oh, well you might say “an inch is just a foot divided by 12”. nope. no it was not (all stuff in this comment is past measurements, because every unit of measurement on the planet uses metric as its base)
Perfect. What’s a barleycorn’s length?
Oh ok, so it could be up to 3x the distance from one barleycorn to another. Perfect. Another ‘standard’
https://simple.wikipedia.org/wiki/Inch https://en.wikipedia.org/wiki/Barleycorn_(unit)
How about the ‘rod’ or ‘pole’ or ‘perch’ (all the same thing) https://simple.wikipedia.org/wiki/Rod_(unit)
Great. So this one I have no visual reference at all. Is this pike length or sword length? (oh you’re all about referencing ‘standard’ objects, but just in case you don’t know a pike can be up to 25 feet long)
Do you see how ridiculous this is? You’re talking about standards that evolved over time from some ‘base’ to mean absolutely nothing today in relation to what they were hundreds of years ago. Metric was also based on ‘standard’ things, like the kilogram, which is just the weight of a litre of water (see, simple). You’re acting like the ‘standards’ of one unit are superior to the ‘standards’ of another unit, except that the unit of measurement you’re saying is superior is completely disconnected from each other. If it wasn’t for standards bodies coming in and saying “a foot is not the length of your foot, it’s exactly this … long” then there would be absolutely no way to convert between any units in imperial measurement.
deleted by creator
I never said you did.
I just showed you exactly how that is not the case. A measurement saying a foot is as long as your own foot is completely useless in every context except the one where you do the measuring and never communicate it to anyone else. The same applies to literally every imperial unit. I also went on to show you that metric units were also based on standard measurements, like kilogram being exactly the weight of a litre of water. You conveniently ignored the fact that imperial was using weird standards while metric used useful, convertible standards. Please try converting 1cu ft of water to weight in imperial, with the ‘standard’ that it’s the length of your foot, not someone else’s foot.
And please do stop referring to imperial units as ‘standard’ measures. That doesn’t mean what you think it does.
i’m not sure if i’m allowed to post PPB here so let’s pretend I did and that you realized and admitted you’re wrong.
That’s for feet only, how about the other measurements? Each person feet also different with each other, it’s kinda weird to just assume children length of their feet is the same with adult’s.
IIRC 1 metre originally is a length choosen so that Earth circumference is 40000km, the later definition is more stable standardization, because turn out you can’t get precise lengths doing that.
deleted by creator
Maybe so for feet, how about other measurements and its conversion. Where’s inch coming from and why it’s 12 inch to be 1 feet, and for yards, miles etc. It’s kinda arbitrary, not natural, and confusing
For a person’s foot to measure exactly 12 inches long, they would wear a US size 14 men’s shoe. Size 47 for the Europeans. So “spproximately the size of a foot” is pretty far off anyway. Most people don’t wear size 14 shoes. In fact, people who wear size 14 shoes often have a lot of trouble buying shoes.
The original definition of a meter was 1/10000000 of the distance from the equator to the poles, hence the circumference of Earth being 40000km.
deleted by creator