• kamen@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      7 hours ago

      For a very long time it’s been possible to set what the button is doing and it’d only cause a hard shut down if you hold it down for like 5 seconds.

    • corvi@lemmy.zip
      link
      fedilink
      arrow-up
      40
      ·
      18 hours ago

      Now that’s my cat’s job. Never again will I buy a case with a top mounted power button.

      • faintwhenfree@lemmus.org
        link
        fedilink
        English
        arrow-up
        23
        ·
        18 hours ago

        I had to disconnect power button from mobo because my room mate’s cat would just shut it off, luckily I had a case whose side panel was very easy to open with a hinge, so I tied two cables near the latch and to turn it in, I’d turn the latch open the case, quickly short the cables and close the panel and latch.

        Thanks for reminding me of that. Also I swear that cat knew what I did and kept trying to open the latch for a few months before giving up.

        • Chivera@lemmy.world
          link
          fedilink
          arrow-up
          12
          ·
          18 hours ago

          Same with me but I have a toddler. Windows has a power button setting that I switched to do nothing when pressed.

          • brap@lemmy.world
            link
            fedilink
            arrow-up
            9
            ·
            18 hours ago

            I almost did, but instead connected one pin from the reset button and one from the power button to the power header, then bridged the other two connectors making it so I have to push both to fire it up. Easy for me to operate, and he’s still not figured it out haha.

          • faintwhenfree@lemmus.org
            link
            fedilink
            English
            arrow-up
            7
            ·
            18 hours ago

            I was on Linux mint XFCE at that time and even though it had a setting to decide what to do when power button is pressed but it was broken and would reset itself every few hours.

      • JordanZ@lemmy.world
        link
        fedilink
        arrow-up
        12
        ·
        17 hours ago

        You could install a second power switch inline with the first. If both are momentary contact then you’d have to press both at the same time to turn it on(or hold one, etc).

        I’ve never actually needed on of these but they keep showing up in movies/games…so I’d vote this. Toggle it on then press the normal button. You could leave it on to keep the regular button working or toggle it off and disable it.

        • Trainguyrom@reddthat.com
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 hour ago

          I’ve never actually needed on of these but they keep showing up in movies/games…so I’d vote this

          Sounds like you need a small electrical project then!

    • M137@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      12 hours ago

      I’ve had that issue in several ways. Of course what you said, had an extension cord with a switch below my desk and I kept accidentally hitting that switch in the same way, lived in an apartment some years ago that had some shitty electrical work done by the previous tenant and if I had enough lamps on while my computer and screen where on and I tried to plug in my phone or turn the TV on the circuit popped, and most recently I’ve been playing games via cloud streaming (Shadow) and my Ethernet cable has lost the security tab thingy on both ends and I keep accidentally moving other cables so they touch the Ethernet cable and it falls out. Most of the time I can just put it back in an reconnect to the cloud computer but sometimes it just refuses to do that so the cloud computer shuts down before I’m able to get it working. Lost several hours of progress in various games throughout the past couple of years, but I never buy anything new unless it’s absolutely needed so I just live with and accept it '^^