This is a lightweight wool shirt, smartwool brand. I think it’s 90 or 100 percent wool, I forgot to photograph the tag.

I use it as a base layer while camping, so looks aren’t that important, but I don’t want it to fall apart.

I got a couple of snags on my last trip, and I poked most of them back in without issue, these two were bigger and I tried stretching the fabric slightly to pull them in. I did it gently, but they both broke 🫠

Should I use a patch? Or sew a few loose stitches to hold things together? Or just leave it alone?

The underside of the shirt is bright orange, the hole is only the top layer, if that makes sense?

Thanks!

  • rbn@sopuli.xyzEnglish
    2·
    36 minutes ago

    If you just want to strop the hole from expanding, I’d sew a circle around it and slightly pull it together. If the hole is too big and the pulling resulted in wrinkles, I’d do 4-8 diagonal connections on the inside of the cloth (so the hole looks like a cut pizza) and then sew a spiral until you reach the middle of the circle.

    If you want to turn the hole into a little art project, you can also look up ‘visible mending’ on the search engine of your choice.

  • pageflight@piefed.socialEnglish
    3·
    3 hours ago

    I think the suggestion to just stitch around it is probably sufficient, but an earlier post in this community pointed me to using a speedweve to basically weave a little patch in-place, picking up stitches around all the sides to sew it onto the mended garment. Looks pretty cool if you want to go to that much effort.

    (Edit: Video with clearer instructions, also demos on non-hand-knit fabric.)

  • Mandarbmax@lemmy.worldEnglish
    3·
    4 hours ago

    I’d toss a few stitches in there to pull it back together as you say, except I would probably try to use as many stitches as I could in the space to more evenly distribute the force around the hole. I’m not very experienced at mending stuff though so if someone else comes in and says something else trust them instead.

    I love to see people fixing cool stuff though so good luck with an easy and effective repair, my friend!