The difference I would note is that in North America those 240V plugs aren’t likely going to be on a 10A circuit — usually they’re going to be more in the range of 30A to 50A, as they’re typically designated in homes for use by a dryer or a range (and if you’re lucky, in the garage for an EV).
That’s not to say you couldn’t run a lower amperage 240V circuit — there just aren’t a lot of practical uses for doing so (I believe some air conditioners only need 15A 240V circuits, but in my (limited) experience these are usually hard-wired, and aren’t plug-in devices).
The difference I would note is that in North America those 240V plugs aren’t likely going to be on a 10A circuit — usually they’re going to be more in the range of 30A to 50A, as they’re typically designated in homes for use by a dryer or a range (and if you’re lucky, in the garage for an EV).
That’s not to say you couldn’t run a lower amperage 240V circuit — there just aren’t a lot of practical uses for doing so (I believe some air conditioners only need 15A 240V circuits, but in my (limited) experience these are usually hard-wired, and aren’t plug-in devices).