• genoxidedev1@kbin.social
    link
    fedilink
    arrow-up
    34
    ·
    1 year ago

    I bet if you put some automation behind it with a raspberry pi or something this would be pretty cool. Program some different doorways etc…

    Thing is, it’s really not private enough to make a difference aside of looking and being cool to show to someone.

        • 9point6@lemmy.world
          link
          fedilink
          arrow-up
          4
          ·
          edit-2
          1 year ago

          A stepper motor with a controller attached to a roller which goes the whole length of the tapes but only just not making contact. Then per-tape you’d need a piano hammer like object attached to a lever on the front side, with something ferrous attached to the other end. Finally a little electromagnet near the ferrous end hooked up to a set of multiplexers that are then hooked up to your Pi.

          Then you’d basically have the Pi run the roller and enable the magnets on any of the tapes that you’d want to move. That way you could in theory run between 1 and all of them in any given direction at the same time

          Bonus points if you attach different note bells or something on the levers so they each make a different sound when they actuate.

          You might need something like a ball bearing on the tip of the hammers, but maybe just a smooth enough surface would do it.

          (This is entirely not practical, but I still kinda want to build it)

        • Khotetsu@lib.lgbt
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          I feel like there could be a market niche for it. Replace the tapes with something… more aesthetically pleasing, maybe hook it up to a remote so you change it between a few preset shapes easily, maybe a pair of motion sensors as an option so that it “opens” on its own, and I think there is some appeal to this as some sort of room divider or something.

          Rich people will spend money on stupid things they’ll never use just to flaunt their wealth, so put a big enough price tag on it and I’m sure there would be some kind of market for it.

          • KyuubiNoKitsune@lemmy.blahaj.zone
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            Having just made some DIY automated roller blinds for my place, I know that it’ll both be a pain in the ass to do, but also probably won’t be too hard. What makes the most sense for me is a strong stepper motor on the side with a long shafts, the shafts needs slots in it and each blind piece that needs to be rotated needs to have a small DIY solenoid to engage with the shaft. You’d only be able to go one direction at a time but it’ll beat running a whole lot 9f stepper drivers and motors.